EN 1492-2 Polyester Endless Round Slings , Flexible Soft Round Lifting Sling
| Place of Origin: | China |
| Brand Name: | Dahua Sling |
| Certification: | BS EN 1492-1:2000 |
| Model Number: | web sling |
| Minimum Order Quantity: | 1000 pcs |
|---|---|
| Price: | USD 30,000 / 20'GP |
| Logo: | We Do It Oursleves | Eye Protector: | White Black Or Same As Webbing |
|---|---|---|---|
| Material: | 100 % Polyester | Packing: | Blank Or Printed |
| Sling Type: | Endless Round Sling | W.L.L: | 1000-3000KG |
| COLOR: | Yellow | Standard: | BS EN 1492-1:2000 |
| High Light: | round lifting slings,round webbing sling | ||
EN 1492-2 Endless Polyester Round Slings , Flexible Soft Round Lifting Sling Safety Factor 7:1
| Product Name | Round sling |
| Material | Polyester |
| Standard | European Standard EN1492-2:2000 and Chinese Standard JB/T8521-2007 |
| Capacity | 1t~3000t |
| Size | 1m-100m |
| Features | *Highly flexible and adaptable to given shapes, especially suitable for loading round objects *Anti-abrasion and anti-incision protection sleeve can be attached *Heat resistant up to 100°C *High strength/weight ratio *Usage life last longer *Protection against cargo surface damage *Safety factor: 5:1, 6:1, 7:1, 8:1 |
| Packing | Carton, wooden case or according to your requirement |
| Delivery Time | 20-40days, based on Qty |
| Application | lifting, loading &unloading, pipe laying |
Capacity
The sling must be both long enough and strong enough for the load and the slinging method. Apply the mode factorfor the slinging method. For use at temperatures exceeding 80°C or below 0°C refer to the suppliers instructions. Ifthe slings are used in multi-leg arrangement the angle formed between the legs should not be less than 30° orgreater than 90°. If abrasion, heat generated by friction or cutting from edges or corners are likely, select a slingfitted with protective sleeves and/or use suitable packing.
In-service Inspection, Maintenance and Replacement
Inspect slings each day before use, looking for:
Missing or unreadable ID tag
Melted, charred or weld-splattered areas
Acid or alkali burns
Holes, tears, cuts, snags or embedded particles
Broken or worn stitching
Excessive abrasive wear or elongation
Knots or brittle areas
Broken, corroded, pitted distorted fittings
Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.
Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;
damaged or deformed end fittings.
